16 พฤษภาคม 2568
ผู้ชม 5 ผู้ชม
The COSMOS MD.H2 generator is designed for GC-detectors requiring H2 fuel gas such as FID, FPD, NPD and TCD.
The Hydrogen gas is produced from deionised water using the exclusive 100% titanium Proton Exchange Membrane (PEM) technology, which provides a very high reliability, new longer life and better purity.
The COSMOS MD.H2 series use a desiccant cartridge that needs to be replaced or refilled when saturated, which allow to dry the H2 gas and increase the purity.
The automatic checking for internal leaks whenever starting the unit and constant control of operating parameters, guarantee maximum safety.
The touch screen interface provides simple and user-friendly management of all functions on the unit.
Advantages product
IMPROVED CHROMATOGRAPH RESULT
The use of hydrogen as a carrier gas allows lower temperature elution, thus extending the life of the chromatograph column. Hydrogen as a carrier gas is faster and more sensitive than the more-expensive helium. Run time savings of 25% to 35% without a decline in resolution.
INCREASED LABORATORY EFFICIENCY
A constant, uninterrupted gas supply of guaranteed purity eliminates interruptions of analyses to change cylinders and reduces the amount of instrument re-calibrations required.
IMPROVED SAFETY
The very limited internal volume (less than 50 ml) allows safe use of the gas generators where the use of cylinders is risky or prohibited.
The application of tested safety technologies stops the unit in the event of leaks or malfunctions
SIMPLE INSTALLATION
Gas generators can be installed in the laboratory, on or under a bench, eliminating the need for long gas lines from cylinders secured elsewhere.
Characteristics
- Flow rate : 110, 170, 260, 300, 400, 500, 600 cc/min
- Purity > 99.9996%
- Pressure up to 7 bar (101.5 psi)
- Exclusive 100% titanium multilayer PEM cell: longer life/ better gas purity
- Touch screen with indication in real time : H2 outlet pressure, H2 flow rate, water quality, water level, auto-diagnostics of breakdown with alarms.
- Automatic checking for internal leaks to guarantee maximum safety
- LED indicators status (Ready, Stand-by, Alarm, Off)
- Remote PC monitoring and diagnostic analysis via USB to interface the unit with customer’s PC software (allow to carry out checks and maintenance effectively, only via a remote connection)
- Compact, space-saving stackable design
|
Models |
MD.H2.110 | MD.H2.170 | MD.H2.260 | MD.H2.300 | MD.H2.400 | MD.H2.500 | MD.H2.600 |
| H2 flow rate -cc/min | 110 | 170 | 260 | 300 | 400 | 500 | 600 |
| Electrolytic cell | Long life Multilayer PEM technology | ||||||
| H2 purity | > 99.9996 % (O2 < 1 ppm, Dew Point < -55°C (-67°F)) | ||||||
| Delivery pressure | 1 – 7 bar (14 – 101.5 psi) | ||||||
| H2 dryer | Dessicant catridge to refill or replaced when saturated | ||||||
| Temperature range | From 5 – 35°C (41 – 95°F) and humidity 80% to 25°C (77°F) | ||||||
| Touch screen | Touch screen (operating parameters, system status, alarms) with LED indicators (Power on/off; ready or errors) |
||||||
| Dimensions (W x H x D) |
27 x 44 x 38 cm (10.5″ x 17″ x 15″) | ||||||
| Weight (kg/lbs) | 18 / 39 | 19 / 42 | |||||
| Power consumption | 75 W | 95 W | 140 W | 180 W | 190 W | 230 W | |
| Electrical supply | 220 – 240 V 50 Hz | ||||||
| 110 – 120 V 60 Hz | |||||||
| WATER | |||||||
| Water quality | Deionised, ASTM II, < 0.1 μS Conductivity | ||||||
| Supply pressure | Max. 6 bar | ||||||
| Internal water tank | 2.3 liters | ||||||
| External water tank capacity (Optionnal) | 5 or 10 liters | ||||||
| CONNECTIONS | |||||||
| Hydrogen outlet | 1/8 Swagelock | ||||||
| Water inlet | Quick release push-in fitting | ||||||
| COMMUNICATION | |||||||
| USB/PC Control | In series | ||||||
| RS232/RS485 | Option | ||||||
| ACCESSORIES | Water tank 5 liters | Water tank 10 liters | |||||
| Part Number | water.tank.005 | water.tank.006 | |||||
