01 ตุลาคม 2567
ผู้ชม 79 ผู้ชม
Description
Introduction
• Unique spring-loaded roller body design adapts itself to tubes with different wall thicknesses and provides long tube life and easy tube installation.
• The pump head has good strength, high toughness and excellent chemical resistance.
• Stable operation and low noise, semi-transparent shell, you can observe the internal operation at any time.
• Used in medium traffic environments.
• Can be used for equipment, instruments, and laboratory.
• Convenient for ODM matching.
Parameters
Motor Type: 60 synchronous motor
Power Supply: AC220V
Wattage: ≤14W
Fixed Speed: 30rpm, 60rpm
Channel number: 1
Number of Rollers: 4 rollers (2 rollers + 2 auxiliary rollers)
Rotation Direction: Clockwise rotation
Type of Tube: Silicone, Pharmed
Method of Tube Installation: Tubing connectors
Pressure Tube Type: Fine-tunable
Pump Head Shell Material: PC
Pump Head Bottom Shell Material: PPS
Pump Head Roller Material: PES
Pump Head Roller Shaft Material: S30408 stainless steel
Pump Head Life: ≥1400h
Noise: ≤60dB (test environment noise ≤40dB, test product and noise meter horizontal distance of 1 meter)
Weight: 0.758kg (without tube)
Dimensions: (L×W×H) 106.5*80*110（mm）
Working environment: Temperature 0- 40°C, relative humidity<80% RH
Storage Environment: Ambient temperature of -20 ~ +50 °C, relative humidity of not more than 95% of the clean and well-ventilated environment, the air shall not contain corrosive, flammable gases, oil mist, dust.
Suitable Tube Model and Flow Rate Reference
| Model | Speed | Material of Tube | Suitable Tube | Tube ID | Maximum Flow |
| T030A2KT15 | 30rpm | Silicone tube | 13# | 0.8mm | 1.8 mL/min |
| 14# | 1.6mm | 7 mL/min | |||
| 19# | 2.4mm | 13.5mL/min | |||
| 16# | 3.1mm | 18 mL/min | |||
| 25# | 4.8mm | 50mL/min | |||
| 17# | 6.4mm | 76ml/min | |||
| T060A2KT15 | 60rpm | Silicone tube | 13# | 0.8mm | 3.6ml/min |
| 14# | 1.6mm | 14ml/min | |||
| 19# | 2.4mm | 27 ml/min | |||
| 16# | 3.1mm | 36ml/min | |||
| 25# | 4.8mm | 99 ml/min | |||
| 17# | 6.4mm | 152 ml/min |
The above data is obtained from the test of purified water with a Lead Fluid tube under normal and pressure conditions in the laboratory. This data is for reference only.
Due to pressure in actual use, temperature, medium characteristics, tube material and other specific factors, the specific situation needs to consult our engineers.
Product Structure & Usage Method
Product Structure
Component Name and Function
1.Pump Head: Installation of a tube to transfer liquid.
2.Mounting Plate: Connects the motor to the pump head and also allows the product to be mounted on other equipment.
3.Motor: Provides power.
Usage Method
Tube Installation
Press the snap to open the pump head shield, open the tube
clamp to install the tube into the pump head, and cover the
pump head shield after the tube installation is completed.
Dimension
unit:mm
