01 ตุลาคม 2567
ผู้ชม 41 ผู้ชม
Ultra-small volume, rotary card design, adjustable tube in 3 directions: up ,down and side. Excellent flow stability and repeatability. High mechanical strength, excellent corrosion resistance and aging resistance.
Flow: 0.001-120 mL/min
Max: 1 Channel
Description
♦ Lead Fluid MM10 pump head suitable for wall thickness 0.86-1mm, ID 0.5-3.2mm silicone tube, Pharmed, PVC, Viton etc. material tube, it can run continuously at the maximum flow rate 29.7 ml/min at 100 rpm, and interval operation, the maximum speed can reach 400 rpm and the flow rate can reach 118.8 ml/min.
♦ The shell of pump head is made of PES material and the roller is made of PVDF material. It has excellent chemical corrosion resistance and high temperature resistance.
♦ The pump head adopts a unique rotary card design. It can be disassembled and assembled without tools. It is easy to replace the pump tube and clean up and maintain. There are two ways to install tube, one is tube connector built-in and the other is to install whole tube.
♦ Fast-loading pump head, the inlet and outlet end can be installed in any direction on the upper, down and side to meet the needs of different working conditions.
♦ Matching 12V/24V DC gear motor, stepper motor and other micro-motors.
♦ Small size, convenient installation and simple operation.
♦ It is suitable for supporting various small instruments and equipment to meet the needs of micro-injection, flushing, and drainage.
Specification
| Shell | PES |
| Roller Material | PVDF |
| Tube Connector | PPPVDF |
| Channel | 1 |
| Number of Roller | 3 |
| Tubing Method | Tube connector built-in ( ID ≥1.6mm)/Whole Tube |
| Clearance Adjustment | Fixed clearance |
| Motor | 12V/24V DC gear motor, stepper motor |
| Transmission Pressure | ≤0.10MPa |
| Working Temperature | 0-40℃ |
| Power | ＜10W |
Flow Rate Parameters
|
Tube material：Silicone tube, Pharmed, PVC, Viton Wall thickness0.86~1mm
|
||||||
|
ID（mm)
|
0.5
|
1
|
1.52
|
2
|
2.79
|
3
|
|
mL/rpm
|
0.016
|
0.047
|
0.092
|
0.146
|
0.3
|
0.33
|
|
mL/min (continuous working max 100rpm)
|
1.6
|
4.7
|
9.2
|
14.6
|
30
|
33
|
|
mL/min (interval working max 400rpm)
|
6.4
|
18.8
|
36.8
|
58.4
|
120
|
132
|
★Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually using it is effected by specific factors such as pressure,medium etc. Aboove for reference only.
Motor Specification
| DC brush motor | Speed: 3 5rpm, 50rpm , 100rpm , 130rpm ,178rpm ,200pm,320pm,409pm |
| Voltage: DC12V/3W ,DC24V/3W | |
| Speed accuracy: ≤±10% | |
| Service life ：1000 hours |
| DC brushless motor | Speed: 45rpm ,68rpm ,120rpm ,150rpm ,250rpm , 350rpm |
| Voltage: DC12V/3W ,DC24V/3W | |
| Speed accuracy:≤±10% |
| 20 Stepper motor | Motor parameter: step angle 1.8° phase 2 phase voltage 3.9V phase current 0.6A phase resistance 6.5Ω±10%
phase inductor 2.2mH±20% |
| Speed range: ≤200rpm |
Products Display
 |
Dimension
DC gear motor
20 Stepper motor
Tube life comparison table
