หมวดหมู่สินค้า: LOAD CELLS
Double bending beam load cell. Measuring element from aluminium. 3000 divisions O.I.M.L. R60 class C. Protected IP 66 (EN 60529) .Nominal capacities 0,3-0,6-1,2-3 kg.
*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp
28 มิถุนายน 2567
ผู้ชม 307 ผู้ชม
Double bending beam load cell. Measuring element from aluminium. 3000 divisions O.I.M.L. R60 class C. Protected IP 66 (EN 60529). Single point load cell. High accuracy with off-center loads.
- Double bending beam load cell
- Measuring element from aluminium
- 3000 divisions O.I.M.L. R60 class C
- Protected IP66 (EN 60529)
- Single point load cell. High accuracy with off-centre loads
- Aplications: direct platform up to 200x200 mm, filling scales etc.
Technical documentation
| Nominal capacities | 0,3-0,6-1,2-3 | kg |
|---|---|---|
| Accuracy class | 3000 | n. OIML |
| Minimum dead load | 0 | %Ln |
| Service load | 150 | %Ln |
| Safe load limit | 200 | %Ln |
| Total error | < ±0.017 | %Sn |
| Repeatability error | < ±0.01 | %Sn |
| Temperature effect on zero | < ±0.01 | %Sn/5K |
| Temperature effect on sensitivity | < ±0.006 | %Sn/5K |
| Creep error (30 minutes) | < ± 0.016 | %Sn/5K |
| Temperature compensation | -10 to +40 | ° C |
| Temperature limits | -20 to +70 | ° C |
| Nominal sensitivity (Sn) | 0,9 ± 0,2 | mV/V |
| Nominal input voltage | 10 | V |
| Max. input voltage | 15 | V |
| Input impedance | 400 ± 20 | Ohm |
| Output impedance | 350 ±3 | Ohm |
| No load output | < ±2 | %Sn |
| Insulation resistance | > 5000 | MOhm |
| Max.deflection (at Ln) | 0.3 - 0.5 | mm |
Product Brochure 
