เวลาทำการ: จันทร์-ศุกร์ เวลา 09:00-17:30 น.

!!   รู้ลึก  รู้จริง เรื่องเครื่องมือทดสอบวัสดุ  !  ยืน 1 เรื่องมาตรฐานการให้บริการ   

เครื่องกำเนิดอัลตราโซนิกความถี่สูงสำหรับของเหลว ( Powerful Ultrasonicator ) ยี่ห้อ Hielscher รุ่น UP400St
หมวดหมู่สินค้า: Ultrasonic Laboratory Devices
With the UP400St (400W, 24kHz), the serial of Hielscher digital sonicators is expanded by a powerful 400 watts ultrasonic probe-type homogenizer. The new UP400St is the successor of UP400S – one of the most popular lab sonicators. Its high ultrasound power and robustness make the UP400St perfectly suitable for the use in demanding environments.
*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp

แท็ก:

10 มกราคม 2567

ผู้ชม 672 ผู้ชม

Being our most powerful laboratory device, the UP400St is suitable to fulfill various applications such as homogenizing, emulsifying, dispersing, deagglomeration & wet-milling (particle size reduction), cell disruption & disintegration, extraction, degassing, as well as sonochemical processes. With sonotrodes of a diameter range from 3 to 40mm, the device is suited for the sonication of sample volumes from 5 to 4000ml. In combination with a flow cell approx. 10 to 50 liters per hour can be sonicated. When used for sample preparation, the UP400St is mainly used for bigger volumes. It is suited for the development of ultrasonic applications in the laboratory, but also in the bench top optimization as well as for the production of small quantities. The device functions and the various accessories allow for different applications and the coverage of very wide parameter configurations.

The UP400St convinces as a powerful and reliable ultrasonic homogenizer: It can be operated continuously 24h/7d under full load and is good for processing up to 400L/h. Generally, the UP400St is used for the sonication of volumes from 5.0 to 4000mL. Due to its robustness and its capability to run 24/7, the UP400St can be also used for the production of smaller quantities. For production processes, the sonication is mostly carried out in a continuous flow-through system with a flow cells and a sonotrode with sealing for the flow cell reactor. In combination with the flow cell FC22K, the material can be sonicated in a continuous flow-through mode, e.g. at a flow rate of 20 to 200mL per minute (the final capacity depends on the application). The stainless steel flow cell is pressurizable up to 5 barg and is equipped with a cooling jacket. By this, inline ultrasonication processes can be simulated in smallest scale.

Related Topics

The Ultrasonic Processor UP400St in Research and Science

Below you can find a selection of scientific articles featuring the ultrasonic processor UP400St. The articles span from ultrasonic extraction over dispersion to electrochemistry. If you are looking for a specific application and related scientific references, please contact us.

 

Engine by shopup.com