เวลาทำการ: จันทร์-ศุกร์ เวลา 09:00-17:30 น.

!!   รู้ลึก  รู้จริง เรื่องเครื่องมือทดสอบวัสดุ  !  ยืน 1 เรื่องมาตรฐานการให้บริการ   

เครื่องเขย่าตะแกรง (Sieve Analysis of up to 3 kg Sample Weight) ยี่ห้อ Nexopart รุ่น Ro-Tap® RX-29 with CE labelling (SIT211)
หมวดหมู่สินค้า: Ro-Tap Test Sieve Shaker
*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp

22 สิงหาคม 2567

ผู้ชม 1081 ผู้ชม


W.S. TYLER® Ro-Tap® RX-29 with CE labelling
W.S. TYLER® Ro-Tap® RX-29 CE The W.S. TYLER® Ro-Tap® RX-29 CE for test sieves up to 203 mm diameter reproduces the circular and tapping motion of hand sieving but with an even mechanical action. It differs from the W.S. TYLER® Ro-Tap® RX-29 in the safety cupboard which is necessary for CE conformity.
 
Most suitable machine for abrasive materials
• The safety cupboard and an an separate control gear meets the demands of job safety that are necessary for CE-labelling in Europe.
• Enables sieving of agglomerating bulk materials.
• Prescribed in the FEPA-standard for abrasive industry.
 
Further advantages at a glance
• The 2D sieving action saves time and manual re-sieving.
• Easy handling – only sieving time has to be set.
 
Technical data
Sieve diameters 200 mm, 203 mm (8")
Sample weight approx. 3 kg
Operating voltage 230 Volt or 115 Volt, 50-60 Hertz
Timer 0-99 minutes
Taps per minute 150
Oscillations per minute 278
Drive electric motor with worm gear
Sound emission 70 dBA
Weight ca. 124 kg (without test sieves)
Dimensions 890 x 610 x 740 mm (B x T x H)

W.S. TYLER® Ro-Tap® RX-29 CE - application examples
• Diamonds
• Abrasives
• Metal powder and metal swarf
• Powder
• Tobacco
• Cacao
• Mining Industry
   
Suitable test sieves for your application
It depends on your application which test sieves should be used for sieve analysis with the W.S. TYLER® Ro-Tap® RX-29 CE. It is suitable for up to 6 test sieves with full height or 13 half-height sieves and one sieve pan with a diameter of up to 203 mm (8”) or 200 mm.

The W.S. TYLER® Ro-Tap® RX-29 CE is integrated in a safety cupboard and can only be started by means of an external control gear when the cupboard is closed. This provides job safety as injuries caused by the circular and tapping motion of the test sieve shaker are prevented.

Particle Analysis
Item Description Part No.
1 Base
2 Hammer
3 Hammer Block
4 Sheet Guard
5 Rotating Guard
6 Lift Rod
7 Upper Main Shaft Washer
8 Main Shaft
9 Upper Carrying Plate (plastic) RX-29
9A Upper Carrying Plate (aluminium) RX-29
9B* Upper Carrying Plate (steel) RX-30
10 Lower Carrying Plate
12 Cam Gear
13 Timing Belt Pulley
14 Eccentric Disc
15 Block
16 Sieve Cover Ro-Tap® RX-29
16A Sieve Cover Ro-Tap® RX-30
17 Sieve Support Plate RX-29
17A Sieve support plate RX-30
18 Sieve support clamp bar RX-29
18A Sieve support clamp bar RX-30
19 Backup Plate
20 Bearing Plate
21 Shield
22 Tube Spacer
23 Cam Shoulder Screw
23A 1/2" I.D. Shim
24 Main Shaft Key to Eccentric
25 Main Shaft Key - Lower
26 Hammer Pin
27 Cork Plug
29 Tie Rod
30 Motor Adaptor
31 Grommet
* position not marked
Item Description Part No.
32 Lift Rod Coupling (2 1/2" lg.)
33 Pedestal Cover
34 Flange Bearing
35 Bearing
36 Flange Bearing
37 Thrust Washer
38 Steel Bushing
39 3/8-16 NC x 2,25" Carriage Bolt
40 Sprocket-14 teeth (1800 RPM) w/Set Screw
40 Sprocket-17 teeth (1500 RPM) w/Set Screw
41 Electronic timer (230 V, 50 Hz)
41 Electronic timer (110 V, 60 Hz)
41A Timer Mounting Clip
42 Motor Standard 115/230 V, 60/50 Hz 1 Phase
42A 3/8-16 x 1" long Hex Head Screw
42B 3/8 I.D. Flat Washer
43 Timing Belt
44 Shim
45 1/2-13x2,50" long Hex Hd. Bolt
45A 1/2 I.D. Lock Washer
47 Clamp Screw
48 3/8" Lock Nut
49 1/2" Lock Nut
50 10-32x0,50" long Flat Head Socket Cap Screw
51 3/8-16x.75" long Flat Head Socket Cap Screw
51A 3/8-16x.1" long Hex Head Screw (replaces ZF-10183)
52 3/8-16x.62" long Hex Hd. Screw
53 5/16-24x1.25" long Socket Head Cap Screw
51 handles for sieve support plate (=1 pair)
55 #10-24x.25" Socket hd. Set Screw
56 3/8 I.D.x1.50" O.D. Fender Washer
60* Timer Cord w/Plug
61* Straight Connector (APC-050)
62* Flexible Conduit

 

ขอใบเสนอราคา
Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท)​
อยู่ในระหว่างการอัพเดทข้อมูล...        
Engine by shopup.com