เวลาทำการ: จันทร์-ศุกร์ เวลา 09:00-17:30 น.

!!   รู้ลึก  รู้จริง เรื่องเครื่องมือทดสอบวัสดุ  !  ยืน 1 เรื่องมาตรฐานการให้บริการ   

ภาษา :

Line : @siamintercorp

เครื่องตัดละเอียดแบบเปียกสำหรับห้องปฏิบัติการ (High Capacity 2 or 3 Axis Programmable Automatic Cutting Machine) ยี่ห้อ Lam Plan รุ่น CUTLAM®5.0 (SIT184)

เครื่องตัดละเอียดแบบเปียกสำหรับห้องปฏิบัติการ (High Capacity 2 or 3 Axis Programmable Automatic Cutting Machine) ยี่ห้อ Lam Plan รุ่น CUTLAM®5.0 (SIT184)
หมวดหมู่สินค้า: Cutting Machines
เครื่องตัดละเอียดแบบเปียกสำหรับห้องปฏิบัติการ (High Capacity 2 or 3 Axis Programmable Automatic Cutting Machine) สามารถใช้ใบตัดขนาดสูงสุดถึง 400 มิลลิเมตร
*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp

แท็ก: Lam PlanMetalMetallographyHighCapacity2 Axis3 AxisProgrammableAutomaticCuttingMachineCutting-MachineCutting-Machine-lamplan

06 มิถุนายน 2567

ผู้ชม 1071 ผู้ชม

CUTLAM® 5.0

The CUTLAM®5.0 is a pedestal-mounted machine with an integrated recirculation/decanter tank. It represents the ultimate equipment in terms of high-capacity programmable automatic cutting machines. Power and advanced control of the cutting steps will guarantee first class efficiency and productivity.

Wheel and table movements 

Fitted in standard with a Ø 355 mm wheel, which produces an automatic vertical and longitudinal movement. The automatic transverse movement is carried out by an optional cross-feed table.

All cutting modes are possible

- Automatic or manual cutting.
- Continuous automatic cutting with ingenious feed speed control:

  • The feed speed is pre-set, and will be automatically reduced if the load on the cutting wheel increases. The pre-set speed returns when the load on the screen decreases.
  • It improves the quality of the cut by limiting the thermal damages over the samples.
  • It is suitable for irregular samples and/or material with heterogeneous hardness.
  • It prevents the wheel from breaking in case of overload.
  • It allows you to work at maximum speed without any risk of damage.

- Automatic sequential cutting for maximum cooling.
- Plunge cutting, horizontal feed cutting and oscillating cutting.
- Repetitive parallel cutting.

Controls

Programming is performed via a large touch screen with a graphical interface that ensures you an intuitive use. Cutting parameters are continuously visible on the screen. Fast positioning of the cutting point is provided by the use of a joystick.

Easy programming

Depending on the location of the sample on the table, and on its dimensions, the screen will indicate the various necessary and possible moves in order to complete the cut. This data can then be saved.

Technical data CUTLAM® 5.0
Wheel ∅ 355 mm (400 mm optional)
Shaft ∅ 25.4 mm
Standard flanges Ø 100 mm
Max cutting capacity Ø 127 mm (with Ø 355 mm wheel) + opening on left and right hand side for long parts
Passage under the wheel 252.5 mm (Ø 355 mm wheel)
Vertical movement Z axis stroke 350 mm, speed from 0,1 to 25 mm/sec, speed advanced 50 mm/sec
Longitudinal movement Y axis stroke 350 mm speed from 0,1 to 25 mm/sec advanced speed 50 mm/sec
Transversal movement X axis stroke 120 mm (optional)
Lubrication Recirculation system, 140 litres, on casters
Cleaning system integrated, with a shower head outside of the cutting chamber
Motor power 5.5 kW
Rotational sppeed Variable, from 1000 to 4000 rpm
Arm speed advance 5 to 200 mm/min during cutting
Table Treated aluminium and interchangeable stainless
Steel plate, W 408 x D 422 mm
Lightening LED strip
Protection Cover with locking system
Body Steel coated with epoxy paint
Pneumatic feeding compressed air 6 bars filtered 5 µm
Electrical power 12 kW comcined
Electrical consumption 32 Ah
Voltage 400 V - 50 Hz three phase + ground
Dimension (WxHxD) 877 (+ 600 mm with control panel) x 1727 x 1800 mm
(H. cover open 2272 mm)
Weight 750 kg
Reference 60 CT50A 00

Technical characteristics and equipment

Theoretical cutting capacity

*space under wheel

A high-capacity, independent cooling/recirculation system (140 liters) is located under the machine. The multipoint nozzles insure excellent cooling of the sample and the cutting wheel even during intensive use.

Fast cleaning is made possible thanks to an exterior shower head and a carefully designed cutting chamber.

The wide cutting table: W 408 x D 422 mm is composed of two independent parts. 4 longitudinal grooves and 6 transversal grooves that allow to fix all kind of clamping systems available as options or on the market.

Options
Machine for cut-off wheel Ø 400 mm 60 CT503 00
Laser positioning device 60 CT506 00

Variantes machines

  
Motorised cross-feed table (X axis) stroke 120 mm, accuracy 0.05 mm 60 CT50A 10
Motorised cross-feed table (X axis) stroke 380 mm, accuracy 0.05 mm 60 CT50A 100

Downloads

 Technical sheet

 Metallography (EN)

 

ขอใบเสนอราคา
Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท)​
อยู่ในระหว่างการอัพเดทข้อมูล...        
 
Engine by shopup.com