06 มิถุนายน 2567
ผู้ชม 2125 ผู้ชม
CUTLAM®micro 2.0
It's a compact laboratory micro-cutting machine intended for the most sensitive materials. The speed range and cutting chamber capacity make this machine incredibly versatile.
The sample is held in position using a vice-tightened holding arm and the wheel located outside the cutting chamber enables a micrometric movement along the Z axis; the movement can be tracked directly on the screen (accurate to 0,02 mm) Thanks to the zeroing system, very accurate parallel cuts can be performed.
A wide range of vices is available, enabling you to clamp any type of component or material. The cutting progress is either controlled manually or with a counterweight system specially adapted to delicate cuts. A rocker arm balances the implement weight, and another one permits to adjust the applied load with precision.
Technical data CUTLAM®micro 2.0 |
|
|---|---|
| Wheel ∅ | 75 to 200 mm |
| Shaft ∅ | 12.7 mm |
| Standard flanges ∅ | 50 mm |
| Lateral arm displacement | Stroke 80 mm (accuracy 0.02 mm) |
| Preload weight | 2 x 200 g |
| Vertical movement | Manual |
| Lubrication | Recirculation system, 10 litres, 2 compartment decantation tank, 100 µ fabric filter, recirculation pumps. 800 L/hour driven by the machine. |
| Motor power | 0.6 kW |
| Rotational sppeed | Variable, from 200 to 4000 rpm |
| Body | Steel coated with epoxy paint |
| Protection | Transparent cover with locking system |
| Touch screen 3.5" | Intuitive and graphic interface |
| Voltage | 230 V - 50 Hz single phase |
| Dimension (WxHxD) | 430 x 300 x 450 mm (H cover open: 644 mm) |
| Weight | 40 kg |
| Reference | 60 CTM20 00 |
Technical characteristics and equipment |
|
|
Fitted with a large-capacity (10 litres, large for the machine’s size), independent filtration/decanting/recirculation tank, it is easy to perform long cuts under ideal cooling conditions. The CUTLAM®micro 2.0 has been designed to simplify maintenance and cleaning operations, the base of the cutting chamber is equipped with an inlet filter to prevent the loss of small parts and components. A 100 µm fabric filter at the decanter inlet filters out the largest particles, and the remainder of the filtration is accomplished by decanting into a compartmented tank. |
|
Included Equipment |
|
| Recirculation system, 10 litres | |
| Cylindrical sample holder with clamping screw: Ø 12 to 50 mm | |
| Set of flanges: Ø 50 mm for cut-off wheel: Ø 125 to 150 mm | |
Options |
|
| Slow speed 50 to 1000 rpm | 60 CTM20 20 |
| Vacuum system for holding thin sections | 60 CTM03 80 |
Downloads
|
|
| Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท) | ||||
| อยู่ในระหว่างการอัพเดทข้อมูล... | ||||
