With their maximum working temperature of up to 300°C and air circulation, the ovens achieve a perfect temperature uniformity which is much better than in ovens of most competitors. They can be used for various applications such as e.g. drying, sterilizing or warm storing. Ample warehousing of standard models provides for short delivery times.

• Tmax 300°C
• Working temperature range: + 5°C above room temperature up to 300°C
• Ovens TR 30 - TR 240 designed as tabletop models
• Ovens TR 450 and TR 1050 designed as floor standing models
• Horizontal, air circulation results in temperature uniformity better than +/- 5°C
• Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to clean
• Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
• Large handle to open and close the door
• Charging in multiple layers possible using removeable grids (number of removeable grids included, see table to the right)
• Large, wide-opening swing door, hinged on the right with quick release for models TR 30 - TR 450
• Double swing door with quick release for TR 1050
• TR 1050 equipped transport rollers
• Infinitely adjustable exhaust at the rear wall with operation from the front
• PID microprocessor control with self-diagnosis system
• Solid state relays provide for low­noise operation
• Defined application within the constraints of the operating instructions
• NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Additional equipment

• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the oven and load
• Infinitely adjustable fan speed of the air circulation fan
• Window for charge observing
• Further removeable grids with rails
• Side inlet
• Stainless steel collecting pan to protect the furnace chamber
• Door hinges on the left side
• Reinforced bottom plate
• Safety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity +/- 8°C
• Transport castors for model TR 450
• Various modifications available for individual needs
• Upgrading available to meet the quality requirements of AMS 2750 E or FDA
• Process control and documentation via VCD software package for monitoring, documentation and control