01 พฤศจิกายน 2566
ผู้ชม 2874 ผู้ชม
| Cold mounting resins | ||
|
Mainly intended for the metallography research sector, the LAM PLAN range of cold mounting resins offers many technical and economic advantages. |
| Acrylic cold mounting resin | |||
| Acrylic resin 601.2 | |||
|
The fluidity of this transparent mounting resin and its very low shrinkage ensure a maximum penetration ratio in cavities. It is ideal for microelectronics, optics and microsystem applications. Compatible for conventional scanning electron microscopy (SEM) examinations. Mono-component resin easy to dose and manipulate (no loss). Polymerisation with low temperature rise in 20 minutes in the blue light device M.M.866 + 10 minutes for the surface varnish. With no disturbing odour, it is resistant to alcohol and acids. |
|||
 |
Characteristics | Qty/kg | Ref. |
|
Transparent Acrylic |
Resin (1 liter) + varnish (100 ml) set |
06 00601 00 |
|
| Epoxy cold mounting resin | |||
| Epoxy resin 603 - CMR free | |||
|
The Resin 603 is a two-component epoxy resin without CMR substance used to achieve high quality technical metallographic mountings at room temperature. This resin is the best choice when the transparency of the coating is a requirement. |
|||
 |
Characteristics | Qty/kg | Ref. |
|
Transparent Epoxy 2 liquid components |
Liquid (1 liter) + hardener (500 ml) set |
06 00603 00 |
|
| Epoxy resin 603.2 - CMR free | |||
|
The Resin 603.2 is a fast-curing two-component epoxy resin without CMR substance used to make technical metallographic mountings. It must be used on materials that withstand temperatures of 140°C. This transparent resin has zero shrinkage, excellent adhesion to all kinds of materials and very good chemical resistance. |
|||
|
Characteristics | Qty/kg | Ref. |
|
Transparent Epoxy 2 liquid components |
Liquid (1 liter) + hardener (500 ml) set Liquid (1 liter) Hardener (500 ml) |
060060320 060160320 060260320 |
|
| Methyl-methacrylate cold mounting resins | |||
| Versatile, it is adapted to the majority of common materials for the fast mounting standard sample. It is possible to change the viscosity by modifying the proportion of the mixture: liquid + powder. Resistant to the principal acids used in laboratories. | |||
| Methyl-methacrylate resin 605 | |||
 |
Characteristics | Qty/kg | Ref. |
|
Green Methyl-methacrylate |
Powder (1 kg) + catalyst (500 ml) set |
06 00605 00 |
|
| * Packaging related to transport restrictions | |||
| Methyl-methacrylate resin 609 | |||
| A perfectly transparent resin used for precision parts, notably those of the electrical or electronics industry. It renders the sample perfectly visible, which allows analysing precise points. It must be used with the pneumatic device M.M.806 to obtain an optimum transparency. |
|||
 |
Characteristics | Qty/kg | Ref. |
|
Methyl-methacrylate |
Powder (1 kg) + catalyst (500 ml) set |
06 00609 00 |
|
| * Packaging related to transport restrictions | |||
| Methyl-methacrylate resin 609 Plastichrome | |||
| The methyl-methacrylate resin 609 is available in the Plastichrome version – 5 transparent colours to simplify the classification of samples. | |||
|
Characteristics | Qty/kg | Color / Ref. |
|
Methyl-methacrylate |
Powder (1 kg) |
BLUE / 06 0071B 00 YELLOW / 06 0071J 00 ORANGE / 06 0071O 00 RED / 06 0071R 00 GREEN / 06 0071V 00 |
|
| Polyester cold mounting resins | |||
| Polyester resin 607 | |||
| The Resin 607 is a three-component resin based on modified polyester. This fast curing resin adheres perfectly to metal surfaces and its mechanical characteristics make it particularly effective on very hard materials. Its very low shrinkage allows edge examinations on metallographic samples. It is resistant to the main acids and bases used in laboratories. |
|||
 |
Characteristics | Qty/kg | Ref. |
|
Modified green polyester |
Liquid resin (1 liter) + hardener (500 ml) set |
06 00607 00 |
|
| Guidance |
 |
| Procedure of the cold mounting |
| The sample is placed at the bottom of the mould; it is recommended to use clips to maintain the thin samples on its edge. Mix the resin components respecting the dosage indicated in the technical sheet. Gently blend to avoid air bubbles. Pour the resin in the mould until the desired level and let it harden on open air or in a pressure device M.M.806 in order to get rid of any bubbles or porosities. The mounting time is about 15 minutes long.  |
| ขอใบเสนอราคา |
|---|
| Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท) | ||||
| อยู่ในระหว่างการอัพเดทข้อมูล... | ||||
