06 มิถุนายน 2567
ผู้ชม 2774 ผู้ชม
CUTLAM® 3.1
Largest cut-off area on the market of Ø 300 mm cut-off machines
The CUTLAM®3.1 offers an unprecedented cutting capacity, the machine table can move forward and backward automatically over a distance of 300 mm.
New, the cut-off wheel has an automatic and linear top-to-bottom movement. With this linear movement, this new-generation of cutting machine offers a 140 mm space under the cutting wheel. The CUTLAM®3.1 has a cover which includes opening side to cut bars.
Many cutting possibilities are offered
This automatic cut-off machine makes it possible to cut vertically (along axis Z), over a maximum stroke of 200 mm, or to cut horizontally along axis Y, over a maximum stroke of 300 mm.
It is also possible to combine the two Z and Y movements. Thus, your machine will be able to perform cutting passes with a pass number and depth, which can be programmed.
This machine can optionally be equipped with a manual or automatic X axis for cutting parallel sections.
Easy to use
The CUTLAM®3.1 is extremely simple to operate with its large touch screen (5.7 inches) and intuitive interface. The 2 motorised axes of CUTLAM®3.1 (optional 3rd axis) can be controlled manually by two joysticks located near the control screen. The internal memory allow to save over 300 cutting programs, which can also be imported or exported via a USB port.
Technical data CUTLAM® 3.1 |
|
|---|---|
| Wheel ∅ | 250 to 300 mm |
| Shaft ∅ | 25.4 mm |
| Max cutting capacity | ∅ 110 mm |
| Space between the cutting wheel and the table (with wheel Ø 300 mm) | 140 mm |
| Table | Stainless steel 574 x 298 mm |
| Longitudinal movement - table | 300 mm |
| Vertical movement - wheel | 200 mm |
| Cooling/Lubrication | Recirculation system, 60 litres decantation tank, 2 chambers, Input 100 µm filter, 800 L/hour pump driven by the machine |
| Motor power | 3.8 kW |
| Wheel rotation sppeed | from 1000 to 4000 rpm |
| Cutting mode | Manual, semi-automatic, automatic |
| Feed speed control | from 0.1 to 20 mm/s, continuous or sequenced. Intelligent motion: automatic check of the feed motion according to the resulting torque on the cutting wheel motor |
| Lightening | LED |
| Protection | Cover secured by interlocking Man present button for operating the axes when the cover is open |
| Voltage | 400 V - 50 Hz three phase + ground |
| Dimension (WxHxD) | 900 x 700 x 1000 mm (H cover open: 1100 mm) |
| Weight | 210 kg |
| Reference | 60 CT31A 00 |
Technical characteristics and equipment |
|
|
Theoretical cutting capacity
|
|
A great variety of possible setting configurationThe rotation speed of the cutting wheel and the feed speed of the axes can be programmed so as to prevent any deterioration or deformation of the samples. 3 cutting modes are possible: manual (via joysticks), semi-automatic and automatic. The movements of the axes can be continuous or sequenced. The CUTLAM®3.1 is also equipped with the smart motion function: the definition of an acceptable torque for the cutting wheel, with the touch screen will automatically regulate the feed speed of the axes. This option makes it possible to cut materials with different hardnesses (e.g. steel with an HVOF coating) without having to modify the feed speed. This option allows to avoid long testing campaigns to define the correct feed speed. |
|
Downloads
|
|
| Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท) | ||||
| อยู่ในระหว่างการอัพเดทข้อมูล... | ||||
