เวลาทำการ: จันทร์-ศุกร์ เวลา 08:30-17.30 น.

ศูนย์รวมเครื่องมือวัดและทดสอบวัสดุแบบครบวงจร โดยทีมงานมืออาชีพ

 

ภาษา :

Line ID : @siamintercorp

เครื่องทดสอบกำลังรับแรงดึง/แรงยึดเหนี่ยวของพื้นผิวคอนกรีต (Pull Out Test Apparatus) ยีห้อ Matest เครื่องทดสอบกำลังรับแรงดึง/แรงยึดเหนี่ยวของพื้นผิวคอนกรีต (Pull Out Test Apparatus) ยีห้อ Matest เครื่องทดสอบกำลังรับแรงดึง/แรงยึดเหนี่ยวของพื้นผิวคอนกรีต (Pull Out Test Apparatus) ยีห้อ Matest
หมวดหมู่สินค้า: Concrete
เครื่องทดสอบกำลังรับแรงดึง/แรงยึดเหนี่ยวของพื้นผิวคอนกรีต (Pull Out Test Apparatus or Pull-off Strength Tester) ตามมาตรฐาน EN 12504-3, ASTM C900, UNI 9536, UNI 10157, EN 1542, EN 1348, EN 1015-12, EN 13687-2, EN 13963, EN 14496, NF P18-858, BS 1881:207 และ ISO 4624 เป็นต้น

28 กุมภาพันธ์ 2563

ผู้ชม 707 ผู้ชม

C376N  - Pull out test apparatus

Used to evaluate the concrete resistance as per the strength applied to extract a disc embedded into concrete.
The standard equipment conforms to EN 12504-3 Specification and comprises hydraulic extraction unit 100 kN capacity with pump, precision manometer 0-100kN, bearing ring, 10 steel discs 25 mm dia. (EN 12504-3), carrying cases.
Weight: 18 kg
DETERMINATION OF POWER EXTRACTION THROUGH INSERTS POST INTRODUCED, WITH FORCED AND GEOMETRICAL EXPANSION
STANDARD: UNI 10157
It’s used to determine the needed power to extract from a con-crete element a metallic insert that is introduced in the element by perforation.

This extraction power it’s used:
a) To investigate on concrete mechanic proprieties in site
b) To estimate the in site concrete’s compression resistance in a case of specific calibration curve.

The equipment is composed of:
C376-10 Connecting rod furnished with bearing ring, to be used with the pull-out instrument to hook the C376-11 insert.
C376-11 Geometric expansion pull-out insert dia. 18x80 mm. Pack of 10 inserts.
C376-12 Hardened drill beat to perform a hole as required from UNI standard and to put in a insert.
C376-13 Drill with SDS mandrin.
C376-14 Striker, to put a insert into the hole.
C376-15 Aspirant pump to clean the hole from detritus and dust

 

E142 - Digital pull-off strength tester

This dynamometer measures the adhesive force and the tensile strength of two layers of materials (concrete, facing plasters, mortars, building plasters, lime etc.) and is particularly suitable for applications concerning testing repairs of any structure where the bond strength between two layers is an essential factor.
Compact, light and suitable for use in any location, this Pull-Off Tester is fitted with a load cell and high resolution large digital display unit; it is therefore suitable for measurements from low loads up to 16 kN, granting a wide working range and ideal for a large number of applications and materials. The direct tensile force is applied by rotating the hand wheel.
The three feet of the unit can be fixed in the large position (overall dimensions 176 mm diameter) with very stable bearing, or in the compact position (overall dimensions 92.5mm diameter), to perform tests in narrow spaces, or for specimens close one to the other.
Specifications:

  • Load capacity: 16 kN
  • Resolution: 10 N
  • Working range: 0.25 to 16 kN
  • Accuracy and repeatability: better than +/- 1%
  • Complete with traceable calibration certificate
  • Battery operated
  • Serial port for PC connection
  • Hand wheel rounds: 60 with mechanical round/counter
  • Graphic indication of the applied load rate
  • Seat ball assuring axial/central load application

Supplied complete with carrying case, but without accessories to perform the test, which have to be ordered separately.
To perform the test a common electric drill is required.
Dimensions: 410x210x270 mm
Weight: 5.5 kg approx.

 

C377 - Micro-coring equipment

UNI 10766

Extract a micro-core samples from a rock is an extremely valid non-destructive method, as it allows analysis and accurate evaluations (compression resistance, ecc.) without causing any damages, considering the dimension of the hole that can be eventually clogged with mortar.
Micro-coring system is ulteriorly valid and reliable if combined with ultrasonic tester and concrete hammer.
Micro-core extraction is easy, correct and requires the presence of one operator only.

The equipment comprises:

  • Suitable electric drill. 230V 1F 50Hz
  • Flanged guide assembly
  • Drilling mask
  • Impregnated diamond bit for cores with Ø 28 x 100 mm
  • Impregnated diamond bit for cores with Ø 28 x 200 mm
  • 2 Self-blocking pincers to fit the flanged guide assembly to the surface
  • Set of accessories comprising: anchors, bits, wrenches, screws.
  • Carrying case.

Dimensions: 550x400x200 mm approx.
Weight: 10 Kg. approx.

Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท)?
อยู่ในระหว่างอัพเดทข้อมูล...        
Engine by shopup.com