C253 - Cast iron cube moulds

These cube moulds meet the requirements of EN 12390-1 Specifications. They are checked in the shape, dimensions and tolerance with instruments certified by an Official SIT Institute (or equivalent), and have a Serial Number marked on each side. The produced cube specimens meet the Standards, by avoiding to
the enduser any expensive dimensional verification.
Complete with base plate, clamp type.
There are models available with a four part wall equal design:

• C253: 100 mm side; 8.3 kg
  
• C253-01: 150 mm side; 15.5 kg
• C253-06: 200 mm side; 27 kg

And with two part wall “V” shaped:

• C253-02: 100 mm side; 8.3 kg
• C253-03: 150 mm; 15.5 kg

C233 - Plastic cube mould 150 mm - Reinforced

Made in Matest

Plastic cube mould, 150 mm side, with X reinforced band on the base and reinforced corners.

Weight: 1300 g approx.

C230N - Plastic cube mould 150 mm - Standard

Made in Matest

Plastic cube mould, standard, reinforced band, 150 mm side.

Weight: 1250 g approx.

C232N - Plastic cube mould 100 mm, 2 gangs - Reinforced

Made in Matest

Plastic cube mould, 100 mm side, two gangs, with X reinforced band on the base. The inside surfaces are very smoothed getting easier the specimen's ejection.

Weight: 1050 g approx.

C248-03 - Steel cube moulds, 3 gangs

These models of steel cube moulds with 3 gangs are extremely sturdy and the inside surfaces are accurately machined.
Nominal dimensions meet to EN 12390-1 requirements.

Multiple models available:

• C248-03: 100 mm side, 17 Kg
• C248-04: 140 mm side, 30 Kg
• C248-05: 150 mm side, 38 Kg

C259-05 - Cast iron split cylinder moulds

ast iron made, heavy duty, they are checked in the shape, dimensions and tolerance with instruments certified by an Official SIT Institute (or equivalent).
Foreseen with fast clamping system with inbuilt revolving screws.
They are easy to use with practical and fast demoulding; recommended
for field use.
The produced cylinder specimen meet the Standards, by avoiding to the enduser any expensive dimensional verification.
Complete with base, clamp type.

Two models available, according to different Standards:

• C259-05: used to produce a cylinder specimen Ø 150x300 mm. Weight 10 Kg approx. STANDARDS: EN 12390-1 | ASTM C39 | AASHTO T23 | T126
• C259-06:  used to produce a cylinder specimen Ø 160x320 mm, weight 11.2 Kg approx. STANDARD: NF P18-400

C228 - Plastic cylinder moulds - Reinforced

Made in Matest

Plastic cylinder moulds with upper and lower reinforced bands.
Two models available:

• C228: Ø 150x300 mm, 2150 g approx.
• C229: Ø 160x320 mm, 2200 g approx.

C258 - Steel cylinder moulds

Internal surface, base, top and bottom ring are accurately machined.

Available in different dimensions and weights:

C237 - Plastic beam moulds - Reinforced

Plastic beam moulds with X reinforced bands on the base and upper double reinforced walls and corners.
Two models available:

• C237: 100x100x500 mm, 2100 g approx.
• C238: 150x150x600 mm, 4400 g approx.

C254 - Steel beam moulds

These models of steel beam moulds are extremely sturdy and the inside surfaces are accurately machined.
Nominal dimensions meet to EN 12390-1 requirements.

They are available in multiple dimensions and weights:

• C254: 100x100x400 mm, 20 Kg
• C254-01: 100x100x500 mm, 23 Kg
• C254-02: 150x150x600 mm, 44 Kg
• C254-03: 150x150x750 mm, 47 Kg
• C254-04: 200x200x800 mm, 86 Kg
• C254-05: 140x140x560 mm, 38 Kg