เวลาทำการ: จันทร์-ศุกร์ เวลา 08:30-17.30 น.

ศูนย์รวมเครื่องมือวัดและทดสอบวัสดุแบบครบวงจร โดยทีมงานมืออาชีพ

 

ภาษา :

Line ID : @siamintercorp

เครื่องเจาะเก็บตัวอย่างภาคสนาม (Pavement Core Drilling Machine) ยีห้อ Matest เครื่องเจาะเก็บตัวอย่างภาคสนาม (Pavement Core Drilling Machine) ยีห้อ Matest เครื่องเจาะเก็บตัวอย่างภาคสนาม (Pavement Core Drilling Machine) ยีห้อ Matest
หมวดหมู่สินค้า: Concrete
เครื่องเจาะเก็บตัวอย่างภาคสนาม (Pavement Core Drilling Machine) สำหรับถนนคอนกรีต และถนนลาดยาง ตามมาตรฐาน EN 12697-27

28 กุมภาพันธ์ 2563

ผู้ชม 456 ผู้ชม

Thanks to the use of sturdy diamond crowns, the Matest core drilling machines allow you to drill different materials (such as concrete, rocks, bituminous surfaces, etc.) and obtain cylindrical samples that can be used to perform different types of tests (compression, evaluation of the elastic module , etc).

Matest offers different types of core drilling machines to meet multiple needs:

  • Core drilling machines with petrol engine to facilitate their use in places where electricity is difficult to use
  • Electric core drilling machines
  • Core drilling machines that can also be used on vertical surfaces thanks to the vacuum effect
  • Light and handy or more robust core drilling machines, according to their specific use

Core Drilling Machines, Petrol Engine

These drilling machines are extremely robust, heavy duty, compact and reliable. The sliding group is rectified in order to assure a very soft and accurate drilling movement.
The drilling excursion is 550 mm and the machine can drill cores up to 200 mm of diameter. Built in water swivel to cool the diamond bit.
The robust steel base is equipped with wheels for easy site displacements, together with four levelling and stabilizing feet.
All working and moving parts are cadmium plated for rust protection. The machine is supplied complete except for: diamond bit, core extractor and spanner (see accessories) which have to be ordered separated.

C319 - Pavement core drilling machine 5 HP

This rugged, compact and por table machine with vertical screw feed, is used for pavement core sampling where it is not easy to get electrical power.
Petrol engine 5 HP power, 4-cycle Briggs & Stratton model.
Dimensions: 850x580x1230 mm
Weight: 135 Kg
WARNING: do not try to operate the drilling machine before reading and comprehending the relevant manual and the manual of the ratiomotor with explosion engine in all their parts.

C319-02 - Pavement core drilling machine 12.5 HP

Pavement core drilling machine 12.5 HP 4-stroke petrol engine, Same to mod. C319, but activated by a petrol engine 12.5 HP power 4-stroke Briggs & Stratton model.
Weight: 150 Kg

Core Drilling Machines, Electric

These drilling machines are extremely practical, lightweight and easy to use. The base is made from aluminium alloy, the steel column can be tilted up to 45°, the motor support is fixed on a saddle sliding on teflon runner granting high performances. The motor incorporates a water swivel to cool the diamond bit. Diamond bit, spanner and core extractor are considered accessories to be ordered separately.

C318N - Core drilling machine

Electric motor at three speeds: 530, 1280, 1780 rpm, with speed reducer, provided of multifunction electronic friction device and switch to CE Safety Directive.
The machine accepts bits diameters from 50 to 150 mm
Power supply: 230V 1ph 50/60Hz 2200 W
Dimensions: 600x320x1020 mm
Weight: 24 kg approx.

C322 - Universal core drilling machine

The excursion group is rectified to assure a very soft and accurate drilling movement. The excursion is 550 mm.
Electric motor at three speeds: 670, 1140, 1580 rpm with speed reducer, provided of friction device and switch to CE Safety Directive.
The height of the vertical column is 1000 mm and it is pre-built for extension column connection (accessory mod. C322-01).

  • Coring angle: 0 to 360° 
  • Power supply: 230 V 1ph 50/60Hz 2200 W
  • Dimensions: 440x750x1300 mm
  • Weight: 85 kg

C324N - Core drilling machine with vacuum facility

The frame and the electric motor are the same of mod. C318N.
The machine is supplied complete with lubricated vacuum pump and pressure accumulation reservoir, which is very useful because it maintains for some times a valid vacuum level also with electric blackout, by avoiding the fall or disconnection of the unit from the wall.
The pump is connected to the utility by means of a ball tap to which a vacuum gage is fitted, that constantly indicates the pressure inside the tank.
Coring angle: 0 to 360° under the condition that the surface is sufficiently flat, and not too porous, to allow the vacuum attachment.
Power supply: 230V 1ph 50/60Hz 2200W
Dimensions: 600x320x1020 mm + pump
Weight: 24 kg + pump 15 kg approx.

C318-10 - Water collecting ring

WATER COLLECTING RING, confining waste water on the surface, for machine model C318N and C324N.
It has to be connected to a suitable electric pump.

 
 
Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท)?
อยู่ในระหว่างอัพเดทข้อมูล...        
Engine by shopup.com