C093-05N - Testing frame to test pipes

This stell made testing frame is suitable for testing:

• Pipe max. diameter (external): 2600 mm
• Pipe min. diameter (external): 450 mm
• Pipe max. length: 2500 mm
• Lower bearers: 2500 mm long
• Upper crossbeam: 2500 mm long
• Frame of structural steel, bolted together with high strength bolts, so it can be easily assembled/disassembled for delivery or for site displacements. The frame has to be locked to a concrete base to be prepared by the customer.
• Two upper crossbeams, raised and lowered by a motor two speed operated winch. The upper frame crossbeam is locked in position by pins inserted through the columns.
• Two lower bearers supporting the pipe to be tested. The bearers are supplied both flat and “V” shaped as requested by the EN 1916 Spec.
• Upper loading beam, floating on a seat.

Power supply of the winch: 230/400V 3ph 50Hz 2000W
Frame dimensions: 3700x2500x6900 mm approx.
Weight: 7000 kg approx.

Note:
The testing frame is delivered disassembled and has to mounted on site following the instructions. The customer can also manufacture locally the testing frame, and purchase the loading/control system only. Testing frames with different capacity and features can be manufactured as per customer’s requirements. Quoted testing frame cannot be sold in the CE markets.