หมวดหมู่สินค้า: LOAD CELLS
Single point load cell. Aluminium.
*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp
01 เมษายน 2567
ผู้ชม 42 ผู้ชม
Double bending beam load cell. Measuring element from aluminium. 3000 divisions O.I.M.L. R60 class C. Protected IP 66 (EN 60529). Single point load cell. High accuracy with off-center loads.
- Double bending beam load cell
- Measuring element from aluminium
- 3000 divisions O.I.M.L. R60 class C
- Protected IP 66 (EN 60529)
- Single point load cell. High accuracy with off-center loads
- Aplications:
- platforms up to 500x500 mm (600x600 mm 50kg)
- personal scales
- platforms up to 400x400 mm
- medical scales
Technical specification
| Nominal capacities | 100-200-300 | kg |
|---|---|---|
| Accuracy class | 3000 | n. OIML |
| Minimum dead load | 0 | %Ln |
| Service load | 120 | %Ln |
| Safe load limit | 150 | %Ln |
| Total error | < ±0.017 | %Sn |
| Repeatability error | < ±0.01 | %Sn |
| Temperature effect on zero | < ±0.01 | %Sn/5K |
| Temperature effect on sensitivity | < ±0.006 | %Sn/5K |
| Creep error (30 minutes) | < ± 0.016 | %Sn/5K |
| Temperature compensation | -10 to +40 | ° C |
| Temperature limits | -20 to +70 | ° C |
| Nominal sensitivity (Sn) | 2 ± 10% | mV/V |
| Nominal input voltage | 10 | V |
| Max. input voltage | 15 | V |
| Input impedance | 400 ± 20 | Ohm |
| Output impedance | 350 ± 3 | Ohm |
| Počáteční hodnota nuly | < ± 2 | %Sn |
| Insulation resistance | > 5000 | MOhm |
| Max.deflection (at Ln) | 0.3 - 0.5 | mm |
Product Brochure