เวลาทำการ: จันทร์-ศุกร์ เวลา 09:00-17:30 น.

!!   รู้ลึก  รู้จริง เรื่องเครื่องมือทดสอบวัสดุ  !  ยืน 1 เรื่องมาตรฐานการให้บริการ   

ภาษา :

สนใจสินค้าและบริการ โปรดติดต่อ Line : @siamintercorp

เครื่องทดสอบแรงดึงแรงกด ขั้นสูง (Advanced Digital Force Gauges) ยี่ห้อ Mark-10 รุ่น Series 4 เครื่องทดสอบแรงดึงแรงกด ขั้นสูง (Advanced Digital Force Gauges) ยี่ห้อ Mark-10 รุ่น Series 4 เครื่องทดสอบแรงดึงแรงกด ขั้นสูง (Advanced Digital Force Gauges) ยี่ห้อ Mark-10 รุ่น Series 4 เครื่องทดสอบแรงดึงแรงกด ขั้นสูง (Advanced Digital Force Gauges) ยี่ห้อ Mark-10 รุ่น Series 4 เครื่องทดสอบแรงดึงแรงกด ขั้นสูง (Advanced Digital Force Gauges) ยี่ห้อ Mark-10 รุ่น Series 4 เครื่องทดสอบแรงดึงแรงกด ขั้นสูง (Advanced Digital Force Gauges) ยี่ห้อ Mark-10 รุ่น Series 4 เครื่องทดสอบแรงดึงแรงกด ขั้นสูง (Advanced Digital Force Gauges) ยี่ห้อ Mark-10 รุ่น Series 4 เครื่องทดสอบแรงดึงแรงกด ขั้นสูง (Advanced Digital Force Gauges) ยี่ห้อ Mark-10 รุ่น Series 4 เครื่องทดสอบแรงดึงแรงกด ขั้นสูง (Advanced Digital Force Gauges) ยี่ห้อ Mark-10 รุ่น Series 4

เครื่องทดสอบแรงดึงแรงกด ขั้นสูง (Advanced Digital Force Gauges) ยี่ห้อ Mark-10 รุ่น Series 4
หมวดหมู่สินค้า: Force Gauges
*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp

แท็ก:

20 มีนาคม 2566

ผู้ชม 1072 ผู้ชม

 

Force Gauges
Mark-10 digital force gauges can be used in a virtually limitless number of tension and compression force testing applications. All force gauges are able to capture the peak force in both tension and compression and have selectable units of measurement. Force gauge capacities are available from 50 gF full scale to 2,000 lbF, the broadest force range in the industry. Mark-10 force gauges may be handheld or used with a force test stand and gripping fixtures to create a complete testing solution.
Advanced Digital Force Gauges Series 4
Series 4 digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 500 lb (0.5 N to 2500 N). The gauges feature a sampling rate of 3,000 Hz, producing accurate results under a wide range of test conditions. Accuracy is ±0.2% of full scale, and resolution is 1/2000. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges’ many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.

On-board data memory for up to 50 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 200% of capacity, and an analog load bar is shown on the display for graphical representation of applied force.

An ergonomic, reversible aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 4 digital force gauges are directly compatible with Mark-10 test stands, grips, and software.

The gauges include MESUR® Lite data acquisition software. MESUR® Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.
 ● High-speed 3,000 Hz sampling rate
 ● USB, RS-232, Mitutoyo, and analog outputs
 ● Large backlit graphic display
 ● 50-point data memory with statistics (min, max, mean, standard deviation) and outputs
 ● Live load bar graph with set point markers
 ● Programmable set points, with alarms and outputs
 ● Peak readings and set points always displayed
 ● 5 selectable units of measurement
 ● Configurable audio alarms and key tones
 ● Password protection, configurable for individual keys and calibration
Accuracy: ±0.2% of full scale
Sampling rate: 3,000 Hz
Power: AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
Battery life: Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
Measurement units: lbF, ozF, gF, kgF, N, kN, mN (depending on model)
Outputs: USB / RS-232: Configurable up to 115,200 baud.
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog: ±1 VDC, ±0.25% of full scale at capacity,
General purpose: Three open drain outputs, one input.
Set points: Three open drain lines.
Safe overload: 200% of full scale (display shows “OVER” at 110% and above)
Weight: M4-012 - M4-100: 1.0 lb [0.5 kg]
M4-200 - M4-500: 1.2 lb [0.5 kg]
Shipping weight: M4-012 - M4-100: 3.0 lb [1.4 kg]
M4-200 - M4-500: 3.2 lb [1.5 kg]
Environmental requirements: 40 – 100°F, max. 96% humidity, non-condensing
Warranty: 3 years (see individual statement for further details)
HS code:   Model no. HS code:
M4 (all capacities) 9024100000
15-1004
09-1163
09-1165
08-1026
AC1030
AC1031
AC1032
AC1035
AC1052		 9024800000
ECCN: EAR99
Country of origin: USA
Capacity x Resolution
Model lbF ozF kgF gF N kN mN
M4-012 0.12 x 0.00005 2 x 0.001 - 50 x 0.02 0.5 x 0.0002 - 500 x 0.2
M4-025 0.25 x 0.0001 4 x 0.002 - 100 x 0.05 1 x 0.0005 - 1000 x 0.5
M4-05 0.5 x 0.0002 8 x 0.005 - 250 x 0.1 2.5 x 0.001 - 2500 x 1
M4-2 2 x 0.001 32 x 0.02 1 x 0.0005 1000 x 0.5 10 x 0.005 - -
M4-5 5 x 0.002 80 x 0.05 2.5 x 0.001 2500 x 1 25 x 0.01 - -
M4-10 10 x 0.005 160 x 0.1 5 x 0.002 5000 x 2 50 x 0.02 - -
M4-20 20 x 0.01 320 x 0.2 10 x 0.005 10000 x 5 100 x 0.05 - -
M4-50 50 x 0.02 800 x 0.5 25 x 0.01 25000 x 10 250 x 0.1 - -
M4-100 100 x0.05 1600 x 1 50 x 0.02 50000 x 20 500 x 0.2 - -
M4-200 200 x 0.1 3200 x 2 100 x 0.05 - 1000 x 0.5 1x 0.0005 -
M4-500 500 x 0.2 8000 x 5 250 x 0.1 - 2500 x 1 2.5 x 0.001 -


Series 4 force gauges are shipped as shown at left, and include the following accessories:

(1) Extension rod *
(1) Hook *
(1) Cone *
(1) Chisel *
(1) V-Groove *
(1) Flat *
(1) Coupling *
(1) Carrying case
(1) USB cable
(1) AC adapter
(1) Battery
(1) Certificate of calibration with data

* The specific accessory depends on the force gauge model. See Included Accessories section for details.


A wide range of test stands and gripping fixtures

MESUR®gauge software (15-1004)
Tabulates and plots load vs. time or load vs. travel. Also calculates statistics, exports to Excel, and more.

Output cables
Send test data to a PC, statistical printer, or other data collector for further analysis.

Eye end adapters
Allow for quick grip installation and removal, and prevent grip rotation.
Mount to common test frames, load cells, and force gauges.

Mounting plate
For mounting Mark-10 gauges to a fixture or testing system. Includes mounting hardware.
Note: Gauge mounting plates are included with Mark-10 test stands.

Accessory Gauge Model
M4-012 - M4-20 M4-50 - M4-100 M4-200 - M4-500

Extension Rod G1024 G1024 G1031

Cone G1026 G1026 G1033

Chisel G1025 G1025 G1032

V-Groove G1027 G1027 G1034

Flat G1029 G1029 G1036

Hook G1028 G1038 G1035

Coupling - G1039 G1037

IN [MM]

Models Thread
M4-012 - M4-100 #10-32 UNF
M4-200 - M4-500 5/16-18 UNC
ขอใบเสนอราคา
Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท)​
อยู่ในระหว่างอัพเดทข้อมูล...        
Engine by shopup.com