เวลาทำการ: จันทร์-ศุกร์ เวลา 09:00-17:30 น.

!!   รู้ลึก  รู้จริง เรื่องเครื่องมือทดสอบวัสดุ  !  ยืน 1 เรื่องมาตรฐานการให้บริการ   

ภาษา :

สนใจสินค้าและบริการ โปรดติดต่อ Line : @siamintercorp

เซ็นเซอร์วัดชีวมวลแบบออนไลน์ (On-line Biomass Sensors) ยี่ห้อ Kbiotech (SIT411)
หมวดหมู่สินค้า: Analysers
เครื่องมือที่ใช้ในการวัดปริมาณของเซลล์หรือเนื้อเยื่อของสิ่งมีชีวิตในถังปฏิกิริยาหรือภาชนะเพาะเลี้ยงแบบเรียลไทม์ โดยไม่ต้องนำตัวอย่างออกมาวิเคราะห์ เซ็นเซอร์เหล่านี้มีประโยชน์อย่างมากในอุตสาหกรรมต่างๆ เช่น การผลิตยา การผลิตอาหาร และการวิจัยทางชีววิทยา
*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp

แท็ก:

15 มีนาคม 2567

ผู้ชม 400 ผู้ชม

 

 
On-line Biomass Sensors
Risk-based stoichiometric process management, quantitative and qualitative multi-parameter process analysis which permits the gain of more process knowledge and safety as well as for TURBIDOSTAT operational mode and feedback control loop.
On-line measurement of total cell density
The Kbiotech OD-CELL sensor performs online measurement of total cell density in solution. The sensor is based on optical density, which measures the turbidity of the cell suspension. The measurement is made at NIR (near-infrared) wavelengths so it is insensitive to changes in media colour.

All particles and molecules that absorb or scatter light at 880 nm will be detected, including living and dead cells and cell debris. This measurement is effective after inoculation, when cells are expanding quickly but concentrations are low, making permittivity-based readings less reliable.

Simple online measurement of cell growth
Reliable values during the growth phase
Early detection of process deviations
Specifications
 ● Sensor length: 120, 225, 325, 425 mm
 ● Diameter: 25 or 12 mm
 ● Optical path length: 5 mm
 ● Wetted parts: 1.4435 stainless steel, sapphire glass, EPDM (FDA approved, USP class VI)
 ● O-ring material: EPDM (FDA approved, USP class VI)
 ● Steam sterilisable, maximum temperature 135° C
 ● Pressure range: 0 – 10 bar (25° C)
 ● Measuring range: 0 – 2500, equivalent to total cell density of 0.5 to 100 g/L dry weight
 ● Measuring principal: absorbance
 ● Wavelength: 880 nm (NIR).
ON-LINE MEASUREMENT OF VIABLE CELL DENSITY
Kbiotech LIVE-CELL sensor enables real-time, online measurement of viable cells in solution. The measurement is not influenced by changes in the media, microcarriers, dead cells, or debris. Online measurement of viable cells makes it possible to detect events and respond in real time without sampling.
 ● Increase yield and lower production costs

 ● Detect changes in cell physiology with frequency scanning
 ● Precisely control harvesting for continuous culturing
 ● Early detection of process deviations
 ● Sensors optimised for multiple conductivity ranges.

The measurement principle is based on capacitance. In an alternating electrical field, viable cells behave like small capacitors. The charge from these small capacitors is measured by the sensor and reported as permittivity (capacitance per area).
SPECIFICATIONS
 ● Process connections: DN25 a-length 70 mm (SG), 46 mm (DG), or 54 mm (DG BE) and DN12 a-length 120, 220, 320, 420 mm
 ● Wetted parts: 1.4435 stainless steel, PEEK (FDA approved, USP class VI),
 ● Platinum, EPDM (FDA approved, USP class VI)
 ● O-ring material: EPDM (FDA approved, USP class VI)
 ● Steam sterilisable, maximum temperature 135° C
 ● Pressure range: 0 – 3 bar (25° C)
 ● Measuring range: 0 – 700 pF/cm, equivalent to viable cell density of 5 to 200 g/L dry weight
 ● Conductivity range standard: 2 – 50 mS/cm; LC: 0.5 – 10 mS/cm; HC: 5 – 100 mS/cm.
ขอใบเสนอราคา
Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท)​
อยู่ในระหว่างอัพเดทข้อมูล...        
Engine by shopup.com