ฝาปิดอัดความดันหัวท้ายพร้อมแกนกลางสำหรับการทดสอบความทนแรงดันของท่อพลาสติก (SCITEQ end closures with tie-bar (rod) 1530) ยี่ห้อ SCITEQ
22 มีนาคม 2562
ผู้ชม 298 ผู้ชม
|For internal hydrostatic pressure testing of pipes. The end closures seal off the sample in order to generate internal pressure in the sample. Max. pressure depends on standard, specifications and pipe sample diameter.
The SCITEQ end closures with tie-bar model 1530 are produced purely in stainless steel. The length of the tie-bar (rod) is defined in the appropriate testing standard. For example according to ISO 1167:2006 - Part 2: The free length, lo, of the pipe between end caps shall be at least three times the nominal outside diameter, dn, with a minimum of 250mm. If, for pipes with dn greater than 315mm, the specified minimum free length, lo, cannot be achieved, a shorter free length, lo, may be chosen with a minimum of two times dn, unless otherwise specified in the referring standard or specification.
End closures with a tie-bar are produced for pipes in PE, PVC and PP. End closures are produced with a specific depth from O-ring to the internal bottom which ensures that even on chamfered and oval PE-pipes, the end closure is tight while pressurising.
Standards: ISO 1167, ASTM D 1598, ASTM D 1599
|Diameter range:||Ø12mm up to Ø1200mm|
|Connection:||1/8" male connection and supplied with screw operated bleed valve|
|Max. test pressure:||Depends on standard, specifications and pipe sample diameter|
SCITEQ pressure testing stations | thermo tank | PC software | laboratory saw
For more information and technical specifications please see the brochure.